Used Redneck engineering

[#1] 1972 Honda Cb 750

Originally a 1992 Harley Davidson FXDC Dyna Glide Custom with 30K miles. I have original speedometer with odometer reading at time of removal. Not just a show chopper but carefully designed to be a comfortable daily driver. Over 5 years of time and energy invested. All factory VIN and serial numbers are intact so no issues registering with DMV or insurance. Titled as a 1992 Harley Davidson Dyna Glide. Frame was modified by Redneck Engineering (Liberty, SC). 43 degrees rake (40 neck & 3 trees) with 65 mm Wide Glide forks. Neck area has been reinforced and professionally TIG welded. Bike geometry was carefully calculated for the correct trail. Both high and low speed stability is excellent (no flop at low speeds or wobbles at high speeds). H-D Evolution 80 ci (rebuilt H-D factory re-manufacturing program Oct12), HD 5 speed transmission with extended main shaft (wide tire upgrade) and HD stock primary, Crane Fireball HI-4 single fire ignition with coil, Ness Big Sucker air cleaner, Samson Big Gun Slasher exhaust, & HD alternator, stator, and rotor (installed new 2012). 250 rear tire on 18 X 8.5 chrome spoke wheel 120 front tire on 21 X 3.25 chrome spoke wheel Hawg Halter front brakes with HD stock rear. BDL hand controls with 5/8 bore brake, cable operator clutch with switches (start, kill, turn L/R, horn, & Hi/Lo beam), Dakota Digital speedo/tach, Custom foot controls with JayBrake master cylinder. All wiring is run internal using high quality automotive wire (TXL). Wire is clearly labeled and all electrical components mounted for easy access. Blue LED accent lighting hidden throughout the bike for visibility and show which can be turned on/off using hidden rocker switch. Over 50 custom handmade parts: Sissy bar, custom engraved poker chip gas cap, Lucky 7 sissy bar insert, front LED turn signals, points cover, neck covers, front fender struts, swing arm light inserts, coil cover, handlebars,etc. House of Kolor custom paint with `Lady Luck` them throughout. A well built, reliable custom chopper. (Anderson, South Carolina)

- date: 2/19/2023 4:42:08 AM
- number of days: 101 days ago
- city: Anderson, south carolina
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#2] 2009 Custom Built Motorcycles Redneck engineering

2009 Custom Built Motorcycles Redneck engineering - 12500.00

- date: 1/19/2023 8:36:37 AM
- number of days: 132 days ago
- city: El cajon, california
- source: ebay.com

realtime search mail alert

view on ebay.com

← back to results

[#3] 2006 Redneck Engineering LOWLIFE

redneck lowlife (Wilmington, North Carolina)

- date: 12/27/2022 4:36:14 AM
- number of days: 155 days ago
- city: Wilmington, north carolina
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#4] 2007 Redneck Engineering Lowlife

6-speed Trick-shift transmission, $3600 custom paint, 300mm rear tire, LAF Exhaust, seat is 18` from the ground, FAST (Glen Allen, Virginia)

- date: 12/27/2022 4:36:14 AM
- number of days: 155 days ago
- city: Glen allen, virginia
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#5] 2002 Redneck Engineering Lowlife

2002 Redneck Engineering Lowlife , Great bike, comes factory with no speedo or turn signals. Not rode very much. Approx 4000 miles and that`s a high estimate... Tires great and oil change done every season. 103ci big v twin with 6 speed trans... 3` open belt drive... Very very minor pitting here and there... Paint a year old...turns heads everywhere it`s seen or heard!!!! $9,000.00 9898234469 (Vassar, Michigan)

- date: 12/27/2022 4:36:14 AM
- number of days: 155 days ago
- city: Vassar, michigan
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#6] 2003 Redneck Engineering Lowlife

2003 Redneck Engineering Lowlife , one bad bike just don`t need $7,200.00 2705059033 (Brandenburg, Kentucky)

- date: 12/27/2022 4:36:14 AM
- number of days: 155 days ago
- city: Brandenburg, kentucky
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#7] 2013 Redneck Engineering Bobber

2013 Redneck Engineering Bobber , Redneck Engineering Mutant, Name: Bob This 2012 Bobber, Pro Built, Redneck Engineering Frame with a fresh low miles Buell S1 White Lighting 1203 cc Engine (1800 + or miles). OD green and Gloss Black Paint (military style). Many custom parts on the bike built only for this bike. This is a very cool bike and gets attention every time it hits the street. 105 hp and light weight for a chopper so its fun to ride. Very dependable and can be ridden anywhere no problems. $9,700.00 (Katy, Texas)

- date: 12/27/2022 4:36:14 AM
- number of days: 155 days ago
- city: Katy, texas
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#8] 2005 Redneck Engineering LOWLIFE

2005 Redneck Eng Lowlife. 124 Inch S & S. 4` BDL primary. Lots of one off custom made CNC parts.Contact: Malcolm 352-625-0340 (Silver Springs, Florida)

- date: 12/27/2022 4:35:47 AM
- number of days: 155 days ago
- city: Silver springs, florida
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#9] 2002 Redneck Engineering Custom

2009 Harley-Davidson FXDC - Super Glide Custom, Stop in or call to make an appointment for a NO OBLIGATION test ride! 2009 Harley-Davidson® Super Glide® Custom This like new Dyna Super Glide Custom features: * Vance and Hines exhaust * Custom air cleaner * Forward mounted cruise pegs * Passenger backrest * Custom air cleaner trim * Custom battery cover trim * Battery charging harness * Security system * Completed 5,000 mile service The Harley-Davidson® Dyna® family has its roots in the factory-custom revolution of the 1970s. These five motorcycles pair Big Twin performance with an extended FX front end. Dyna® has always had a reputation for great handling, with loads of attitude that appeals to riders with a strong inclination for independent thinking. (Langhorne, Pennsylvania)

- date: 12/27/2022 4:35:47 AM
- number of days: 155 days ago
- city: Langhorne, pennsylvania
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#10] 2002 Redneck Engineering - 5 000 Clayton

2002 Redneck Engineering - 5 000 Clayton

- date: 12/20/2022 7:41:28 AM
- number of days: 162 days ago
- city: Gadsden, al
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#11] *~sKGqA8A 2006 Redneck Engineering Chopper.8*Mf5BGO

HIGH CUSTOM CHOPPER BLACK FEATURES AND ACCESSORIES: 100ci S&S ENGINE 1638cc CUSTOM HEAT WRAPPED EXHAUST CUSTOM INTAKE CUSTOM SEAT CUSTOM BONE SHIFT BAR 250 REAR TIRE OPEN PRIMARY - This REDNECK ENGINEERING i Keywords: Weddings-video--photo-photograph

- date: 12/18/2022 9:38:41 AM
- number of days: 164 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#12] 2008 Buell Chopper,Sportster Chopper,Redneck Engineering

Built making use of a Redneck Engineering Buell Mutant chassis kit. The frame rear fender fuel tank oil tank battery box and seat pan is all part of the chassis kit. Just to highlight a few of the framework unique features: concealed axle adjuste

- date: 11/7/2022 8:37:48 AM
- number of days: 205 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#13] 2006 REDNECK ENGINEERING SPRINGER SD-300 CURVES CHOPPER

Used 2006 REDNECK ENGINEERING SPRINGER SD-300 CURVES CHOPPER - Asking price: 18995 dollar - Craigslist

- date: 10/18/2022 10:21:06 AM
- number of days: 225 days ago
- city: Saint louis missouri
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#14] 2004 Redneck Engineering Chopper - 8 000 Lincoln

2004 Redneck Engineering Chopper - 8 000 Lincoln

- date: 9/17/2022 1:29:48 AM
- number of days: 256 days ago
- city: Salina, ks
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#15] 2004 Redneck Engineering Curves - 11 997 San Antonio TX

2004 Redneck Engineering Curves - 11 997 San Antonio TX

- date: 9/17/2022 1:29:48 AM
- number of days: 256 days ago
- city: Brownsville, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#16] 2005 Redneck Engineering Chopper - 12000 Smyrna

2005 Redneck Engineering Chopper - 12000 Smyrna

- date: 9/17/2022 1:29:48 AM
- number of days: 256 days ago
- city: Atlanta, ga
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#17] 2005 Redneck Engineering Chopper - 16000 SAINT PETERSBURG

2005 Redneck Engineering Chopper - 16000 SAINT PETERSBURG

- date: 9/17/2022 1:29:48 AM
- number of days: 256 days ago
- city: Tampa, fl
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#18] 2006 Redneck Engineering Gettin High Chopper Motorcycle Chasis

2006 Redneck Engineering Rigid Redneck Rocket Gettin High frame w/ oil tank Springer front end with a 45 degree rake 18 rear 21 front 60 Spoke billet wheels Metzeler Tires - 200 /50/18 rear 80 /90H/21 Front with Fenders Custom 4.2 gal gas tank

- date: 9/17/2022 1:29:00 AM
- number of days: 256 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#19] 2010 Redneck Engineering Gettin High Custom Chopper

I am extremely pleased to be representing this 2010 Redneck Engineering Gettin High Custom Chopper for an extremely motivated seller from Sunnyvale California. Detailed right here are a few of the facets of this bike and please remember that this bik

- date: 9/17/2022 1:29:00 AM
- number of days: 256 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#20] 2008 Buell Chopper,Sportster Chopper,Redneck Engineering,Gangster Choppers

Built using a Redneck Engineering Buell Mutant framework kit. The frame rear fender fuel tank oil tank battery box and seat pan is all part of the chassis kit. Simply to highlight a few of the framework special functions: hidden axle adjusters d

- date: 9/14/2022 9:00:04 PM
- number of days: 259 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#21] 2005 Redneck Engineering Chopper

2005 Redneck Engineering Chopper - 14500.00

- date: 9/13/2022 9:59:43 AM
- number of days: 260 days ago
- city: Woodlawn, tennessee
- source: ebay.com

realtime search mail alert

view on ebay.com

← back to results

[#22] 2004 Redneck Engineering Chopper at Motorsport Collective

Used 2004 Redneck Engineering Chopper at Motorsport Collective - Asking price: 16999 dollar - Craigslist

- date: 9/7/2022 9:28:50 AM
- number of days: 266 days ago
- city: Delaware
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#23] 2005 Redneck Engineering SD300 SPRINGER

2005 Redneck Engineering SD300 SPRINGER - Price 6000 - City Riverside California

- date: 8/25/2022 11:29:18 AM
- number of days: 279 days ago
- city: Riverside california
- source: listedbuy.com

realtime search mail alert

view on listedbuy.com

← back to results

[#24] Redneck Engineering Chopper - 9 800 Cedar Point

Redneck Engineering Chopper - 9 800 Cedar Point

- date: 8/12/2022 6:50:28 PM
- number of days: 292 days ago
- city: Jacksonville, nc
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#25] Redneck Engineering custom chopper - 19 000 burleson

Redneck Engineering custom chopper - 19 000 burleson

- date: 8/12/2022 6:50:28 PM
- number of days: 292 days ago
- city: Killeen, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#26] Redneck Engineering Chopper - 10 000 Porter

Redneck Engineering Chopper - 10 000 Porter

- date: 8/12/2022 6:50:28 PM
- number of days: 292 days ago
- city: College station, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#27] 2004 Redneck Engineering LOWLIFE

redneck lowlife (Wilmington, North Carolina)

- date: 8/12/2022 6:50:25 PM
- number of days: 292 days ago
- city: Wilmington, north carolina
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#28] ,.2006`` Custom Built Motorcycles Chopper``]]

2006 Redneck Engineering Drop Seat Custom Chopper- 110 Revtech Motor- 6spd Transmission- 250 Avon Rear Tire- NEW Avon Front Tire- Custom Stingray Seat- Custom Metallic Paint w/Stripe- Digital Speedometer/Trip Meter- Open Primary- Custom Exha

- date: 8/12/2022 6:49:55 PM
- number of days: 292 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#29] 2013 REDNECK ENGINEERING GETTING HIGH CHOPPER

2013 REDNECK ENGINEERING GETTING HIGH CHOPPERHD 80CI 1340cc MOTOR6 SPEEED TRANNY3 BDL OPEN PRIMARYGANDUER AUTO CLUTCHPM CONTOUR BLACK CLUTCH & BRAKE MASTERCYLINDERS & GRIPS PM CONTOUR BLACK FWD CONTROLSPAUL YAFFEE CUSTOM XPIPESJESSE JAMES V

- date: 7/14/2022 7:08:28 AM
- number of days: 321 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#30] Revtech 110 motor and 6speed transmission  off a redneck engineering choppe

Revtech 110 motor and 6speed transmission  off a redneck engineering chopper - 4000.00

- date: 6/27/2022 2:28:50 AM
- number of days: 338 days ago
- city: Grand prairie, texas
- source: ebay.com

realtime search mail alert

view on ebay.com

← back to results

[#31] harley, 2011 chopper

ihave a 2011 harley buell 1200cc chopper by redneck engineering. the pictures speak for themselves. 5 800 miles on this bike. the guy told me new they sold for $22 000. i'd like $8 500fot it. come see it. the original seat is on the ground. more pic

- date: 6/6/2022 6:10:30 AM
- number of days: 359 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#32] 2006 Redneck Engineering GET N HIGH CUSTOM CHOPPER

2006 REDNECK ENGINEERING GET N HIGH CUSTOM CHOPPER, This 2006 REDNECK ENGINEERING GET N HIGH CUSTOM CHOPPER CUSTOM CHOPPER features a 100ci S&S ENGINE engine. The vehicle is Black with a Not Specified interior. It is offered As-Is, extended warranty is available. - 2006 REDNECK ENGINEERING GET N HIGH CUSTOM CHOPPER BLACK FEATURES AND ACCESSORIES: 100ci S&S ENGINE 1638cc CUSTOM HEAT WRAPPED EXHAUST CUSTOM INTAKE CUSTOM SEAT CUSTOM BONE SHIFT BAR 250 REAR TIRE OPEN PRIMARY - This REDNECK ENGINEERING is in Excellent overall exterior condition - Custom Exhaust, Custom Seat, Special Tank, CUSTOM INTAKE CUSTOM BONE SHIFT BAR 250 REAR TIRE - (Mchenry, Illinois)

- date: 5/20/2022 4:45:26 AM
- number of days: 376 days ago
- city: Mchenry, illinois
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#33] 2005 REDNECK ENGINEERING DROP SEAT MODEL REMOVED

2005 REDNECK ENGINEERING DROPSEAT MODEL; Great bike really fast. BARELY DRIVEN AND IT NEEDS TO BE DRIVEN IT DESERVES TO BE DRIVE. Everywhere you go people ask to take photos. This bike sits so low lower then any bike I've seen. It as a 280 back t

- date: 5/14/2022 8:47:32 AM
- number of days: 382 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#34] 2010 Redneck Engineering Gettin-High beautiful tribal scheme and one o

I am very happy to be representing this 2010 Redneck Engineering Gettin High Custom Chopper for an extremely determined seller out of Sunnyvale California. Noted here are some of the aspects of this bike and kindly keep in mind that this bike just ha

- date: 5/5/2022 8:37:16 AM
- number of days: 391 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#35] Redneck Engineering custom chopper

Used Redneck Engineering custom chopper - Asking price: 19000 dollar - Craigslist

- date: 4/17/2022 7:12:55 AM
- number of days: 409 days ago
- city: Pensacola florida
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#36] 2006 Redneck Engineering Chopper amazing

Used 2006 Redneck Engineering Chopper amazing - Asking price: 8500 dollar - Craigslist

- date: 4/1/2022 5:17:23 AM
- number of days: 425 days ago
- city: Tucson arizona
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#37] 2006 Redneck Engineering Custom Chopper

This bike is a definite head turner tons of attention every where you go!!Runs great and looks even better!107 S&S Engine6 Speed Baker TransmissionOpen Primary300 Rear TireSpringer Front EndBeautiful Custom PaintOnly 3700 MilesBike is in excellent c

- date: 3/29/2022 4:58:31 AM
- number of days: 428 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#38] 2002 Custom Built Motorcycles Chopper low reserve

DescriptionMake: OtherModel: Chopper low reserveMileage: 3 254 milesYear: 2002Condition: Usedup for sale is my 2002 custom chopper built by redneck engineering. its the lowlife design. turns heads everwhere i take it and i have personally ridin

- date: 3/29/2022 4:58:31 AM
- number of days: 428 days ago
- source: americanlisted.com

realtime search mail alert

view on americanlisted.com

← back to results

[#39] 2006 Redneck Engineering Custom Chopper - 15 000 Boardman

2006 Redneck Engineering Custom Chopper - 15 000 Boardman

- date: 1/22/2022 3:41:31 PM
- number of days: 494 days ago
- city: Chautauqua, ny
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#40] Redneck engineering Low life chopper - 10 900 Severn

Redneck engineering Low life chopper - 10 900 Severn

- date: 1/22/2022 3:41:31 PM
- number of days: 494 days ago
- city: Baltimore, md
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#41] 2003 Redneck Engineering GETTIN HIGH

2003 ridged, 113 S and S, 5 speed transmission, custom paint, less than 5000 miles. I still have the original swept back handle bars if the 8 inch risers are to high. $10000.00 but it is negotiable. (Glen Burnie, Maryland)

- date: 1/22/2022 3:41:30 PM
- number of days: 494 days ago
- city: Glen burnie, maryland
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#42] 2007 Redneck Engineering MUTANT

needs very little rear belt,paint little wiring (Brandenburg, Kentucky)

- date: 6/2/2021 4:14:00 PM
- number of days: 728 days ago
- city: Brandenburg, kentucky
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#43] 2004 Redneck Engineering Chopper

2004 Redneck Engineering Chopper - 8 000 Lincoln

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: Lincoln, ne
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#44] 2004 Redneck Engineering Curves

2004 Redneck Engineering Curves - 11997 San Antonio TX

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: San antonio, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#45] Redneck engineering pro street chopper

Redneck engineering pro street chopper - 12000

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: Richmond, va
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#46] Redneck Engineering Chopper REDUCED only

Redneck Engineering Chopper REDUCED only - 10500 Edinburg

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: Houston, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#47] Redneck Engineering Chopper

Redneck Engineering Chopper - 15000

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: Humboldt, ca
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#48] 2004 Redneck Engineering Chopper Trailer Queen

2004 Redneck Engineering Chopper Trailer Queen - 24999 Victoria Tx

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: Victoria, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#49] 2005 Redneck Engineering Custom Chopper

2005 Redneck Engineering Custom Chopper - 8999 Rolla MO

- date: 5/16/2021 10:08:53 AM
- number of days: 745 days ago
- city: Lake of the ozarks, mo
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#50] 2005 Redneck Engineering Mutant

2005 Redneck Engineering Mutant , 2005 mutant buell redneck engineering mutant buell drag Kit ( frame, gas tank, oil tank, rear fender) 1997 Buell m2 cyclone power plant with thunderbolt heads. Oem buell wheels, forks and brakes Accutronix billet tripple trees, and billet forward controls BDL billet hand controls Billet Velocity Stack Breather There are paint imperfections, and I have priced it accordingly. You can still have it painted and end up with less than half of the cost to build it. Spare set of buell wheels with tires Spare rear brake caliper and mount Spare oem buell 1200 Carbs x 2 Spare set of RSD Ape Hanger handle bars (are on bike in the photo) Harley carb tool + any other parts I have for it will go with the bike Does have a few paint inperfections around the gas cap. Therefore I have priced accordingly. Hate to sell but don`t ride. $5,200.00 (Hendersonville, North Carolina)

- date: 5/16/2021 10:08:52 AM
- number of days: 745 days ago
- city: Hendersonville, north carolina
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#51] Custom Built Motorcycles : Chopper 2009 redneck engineering lowlife custom chopper motorcycle blue chrome

2009 Redneck Engineering Lowlife , Bike is very well maintained with tons of chrome. BDL 3 inch open primary, all PM controls, levers and brakes, Baker transmission, custom ostrich seat, 80 spoke wheels, Hidden oil tank, blue led lights that allow bike to glow blue and can be turned on by remote, Bike was custom painted by Unlimited Dreams with ghost flames for 6K,127 Ultima motor 149hp to the rear, bike detailed and just tuned with new spark plugs, compression valves, chrome ignition wires, battery and new rear 240 metzeler rear tire (was replaced due to a nail not wear and tear). 2k miles. Bike turns heads everywhere, you will not find one as clean and well maintained as this one. Also have helmet, mirrors, extra bars and paint. Please call John at (631) 875-6543 $18,000.00. (Scottsdale, Arizona)

- date: 4/17/2021 5:37:22 AM
- number of days: 774 days ago
- city: Scottsdale, arizona
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#52] Custom Built Motorcycles : Chopper Custom

2009 Redneck Engineering Lowlife , Bike is very well maintained with tons of chrome. BDL 3 inch open primary, all PM controls, levers and brakes, Baker transmission, custom ostrich seat, 80 spoke wheels, blue led lights that allow bike to glow blue and can be turned on by remote, Bike was custom painted by Unlimited Dreams with ghost flames for 6K,127 Ultima motor 149hp to the rear, bike detailed and just tuned with new spark plugs, compression valves, chrome ignition wires, battery and new rear 240 metzeler rear tire (was replaced due to a nail not wear and tear). 2k miles. Bike turns heads everywhere, you will not find one as clean and well maintained as this one. Also have helmet, mirrors, extra bars and paint. Please call John at (631) 875-6433 $18,000.00 (Scottsdale, Arizona)

- date: 4/17/2021 5:37:22 AM
- number of days: 774 days ago
- city: Scottsdale, arizona
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#53] Custom Built Motorcycles : Chopper 2006 redneck rocket built by redneck engineering

2006 Redneck Rocket100 inch Rev-Tech5 speed transmissionBDL belt driveBuilt by Redneck Engineering, not a kit bike Please ask any and all questionsWill send more pictures upon requestLocal Pick up preferred, will assist with shipping if needed (Toms River, New Jersey)

- date: 4/16/2021 6:07:00 PM
- number of days: 775 days ago
- city: Toms river, new jersey
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#54] Custom Built Motorcycles : Chopper 2005 redneck engineering custom gettin chopper w 100 s s

One of a kind Custom Chopper Built by Redneck Engineering.Solid Chrome 18` Rear Wheel and Custom Chrome 21` Spoked Front Wheel. All custom sheet metal fabricated by Redneck Engineering. One of a kind paint by Robert Pradke (of Indian Larry fame)This bike must be seen to be believed! The original purchase price for this custom chopper was over $30,000Molded Sheet MetalS&S 100` Motor Tuned by Kendall Johnson Show Polished BDL 3” Open Belt Drive6 Speed Transmission with 5yr Warranty Performance Machine Hand and Foot ControlsAvon Venom TiresCustom ExhaustAll Internal Lines and WireDakota Digital SpeedometerCustom Leather Seat with Gel InsertHeadwinds HeadlampCustom LED Brake Lights and Turn Signals molded into rear fenderK&N Air Filter (Norwalk, Connecticut)

- date: 3/22/2021 9:19:42 PM
- number of days: 800 days ago
- city: Norwalk, connecticut
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#55] 2005 Redneck Engineering CURVES 10800

2005 Redneck Engineering CURVES 10800

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Central louisiana, la
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#56] 2004 REDNECK ENGINEERING REDNECK ROCKET

2004 REDNECK ENGINEERING REDNECK ROCKET - 7500 LANCASTER

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Lancaster, pa
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#57] 2013 Custom Pro Street Redneck Engineering CURVES 22000

2013 Custom Pro Street Redneck Engineering CURVES 22000

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Richmond, va
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#58] 2004 Redneck Engineering LOWLIFE 18000

2004 Redneck Engineering LOWLIFE 18000

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Humboldt, ca
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#59] 1998 redneck engineering Buell rigid chopper

1998 redneck engineering Buell rigid chopper - 3000 Cross Hill

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Greenville, sc
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#60] 2005 Redneck Engineering

2005 Redneck Engineering - 10500 Jacksonville

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Jacksonville, nc
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#61] Redneck Engineering

Redneck Engineering- Lowlife Chopper REDUCED only - 10500 Edinburg

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Mcallen, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#62] REDNECK ENGINEERING MUTANT HARLEY BUELL 1200

REDNECK ENGINEERING MUTANT HARLEY BUELL 1200 - 3800 BENSALEM

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Philadelphia, pa
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#63] Redneck Engineering Lowlife Chopper REDUCED

Redneck Engineering Lowlife Chopper REDUCED - 9950 Edinburg Mcallen

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: Mcallen, tx
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#64] Redneck engineering chopper custom sd300

Redneck engineering chopper custom sd300 - 9000

- date: 3/22/2021 9:18:33 AM
- number of days: 800 days ago
- city: New jersey, nj
- source: shoppok.com

realtime search mail alert

view on shoppok.com

← back to results

[#65] 2000 Redneck Engineering LOWLIFE

2000 REDNECK LOWLIFE 2,506 miles, RevTech 100ci engine, 250/40 rear tire,w/ 3 Spoke Wheels, Vance & Hines pipes, Chrome Lowers, Braided Lines, Chrome left side pulley... Check out the pics! (Arden, North Carolina)

- date: 3/22/2021 9:18:32 AM
- number of days: 800 days ago
- city: Arden, north carolina
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#66] 2007 Redneck Engineering Curves

2007 Redneck Engineering Curves , 6-inch up and 6-inch out stretch, 48 degree rake, 16 inch over springer front end, powder coated and diamond cut cylinders and heads, 6 speed transmission, foot clutch, hand shift, 300mm rear tire, exile sproater brake, frame completely moulded, all wires run internally, wire plus wiring harness, wire plus digital odometer, turn signals, horn. For more details, call Don at 740-424-3748. $12,500.00 7404243748 (Wintersville, Ohio)

- date: 3/22/2021 9:18:32 AM
- number of days: 800 days ago
- city: Wintersville, ohio
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#67] 2006 Redneck Engineering Mutant

2006 Redneck Engineering Mutant , It`s a redneck engineering mutant. (I have documents from redneck and rockstar) The donor bike was a 99 Buel cyclone. (All parts HD). Motor has 19k miles on it. 1250 motor with big bore kit and race cam. 98hp to the wheel. It was built by rockstar customs in 2006. Rigid Lowrider frame. 200 rear tire, Buel brakes, controls and rims etc. Supertuner 2 to1 exhaust. It was built for the speed channel, It has the speed logos on it. It was taken on tour through race season, then auctioned. I am the second owner. It has a new battery, plugs,wires, mirrors, starter, choke, fluids. Its a riders bike, not a trophy bike. It`s low, it`s loud, it`s fast, and it`s fun to ride. Runs great. Clean title, ready to go. Bike sold for $15k. Heartbroken to sell, two small kids and need the cash. $8,500.00 7186050014 (Staten Island, New York)

- date: 3/22/2021 9:18:32 AM
- number of days: 800 days ago
- city: Staten island, new york
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#68] Custom Built Motorcycles : Chopper Redneck engineering

Redneck engineering custom paint. Lots of custom one off fabrication parts. Custom paint job on rear fender throughout the whole bike. Custom air cleaner. Located near Ocala, Florida. (Silver Springs, Florida)

- date: 3/22/2021 9:18:32 AM
- number of days: 800 days ago
- city: Silver springs, florida
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#69] 2012 Redneck Engineering Lowlife

2012 Redneck Engineering Lowlife , 2012 Redneck Engineering Custom Chopper. Approx 6500 miles, new battery, new tires, just had it tuned up and shes ready for the road! A definite head turner! No trades, cash offers only please. $9,000.00 (Florence, Kentucky)

- date: 3/22/2021 9:18:30 AM
- number of days: 800 days ago
- city: Florence, kentucky
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#70] 2009 Redneck Engineering Lowlife

2009 Redneck Engineering Lowlife , Bike is very well maintained with tons of chrome. Bdl 3 inch open primary, all PM controls, levers and brakes, Baker transmission, custom ostrich seat, 80 spoke wheels, blue led lights that allow bike to glow blue and can be turned on by remote, 127 ultima motor 149hp to the rear, bike detailed and just tuned with new spark plugs, compression valves, chrome ignition wires, battery and new rear 240 metzeler rear tire. 2k miles. Bike turns heads everywhere, you will not find one as clean and well maintained as this one. Please call John at (631) 875-6433 $18,000.00 6318756543 (Scottsdale, Arizona)

- date: 3/22/2021 9:18:30 AM
- number of days: 800 days ago
- city: Scottsdale, arizona
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#71] 2006 Redneck Engineering CURVES

Excellent condition (Beckley, West Virginia)

- date: 3/22/2021 9:18:22 AM
- number of days: 800 days ago
- city: Beckley, west virginia
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#72] 2013 Redneck Engineering Monoshock

2013 Redneck Custom SFCA soft tail chopper 1423 mi 120` Ultima 6 spd Trans 250 rear tire 23` front wheel Perf. Machine wheels LED headlight Custom paint and pipes. Too much to list Call - 281 four 33 two 3 two four Wife wants pool. My loss is your gain! (Waller, Texas)

- date: 3/22/2021 9:18:22 AM
- number of days: 800 days ago
- city: Waller, texas
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#73] 2008 Redneck Engineering Geico Redneck Logic BUELL MUTANT

2008 REDNECK ENGINEERING Geico Redneck Logic BUELL MUTANT, 2008 Geico BUELL Mutant Red Neck Chopper, Bobber. Built by Logic Cycles. A 1200 c.c. Buell engine thats fast, reliable and different from most other choppers truly sets this bike apart. Custom Red Neck drop seat and a custom springer front end painted to match the beautiful Red paint. The grey marble inlay is gorgeous and sets the bike off perfectly. Also the oil tank is custom painted red with marble inlay to match. This bike was admired by Warren Buffet and Bill Gates. Both felt they had to sit on it for a picture because they were that impressed!!! This bike was also chosen to be in the 2014 Sturgis Buffalo Chip Calendar. This is a one of a kind that will turn heads wherever you go whether its to your local hang out or a bike show you`ve just entered. Stop in today at Cycle Warehouse, 200 S. Main St. Butler Pa. or call Jen at 724 282 7278. We have two floors of pre-owned, vintage and British motorcycles ready to go. (Butler, Pennsylvania)

- date: 3/20/2021 1:29:05 PM
- number of days: 802 days ago
- city: Butler, pennsylvania
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#74] 2004 Redneck Engineering Gettin High

2008 REDNECK ENGINEERING Geico Redneck Logic BUELL MUTANT Bo, 2008 Geico BUELL Mutant Red Neck Chopper, Bobber. Built by Logic Cycles. A 1200 c.c. Buell engine thats fast, reliable and different from most other choppers truly sets this bike apart. Custom Red Neck drop seat and a custom springer front end painted to match the beautiful Red paint. The grey marble inlay is gorgeous and sets the bike off perfectly. Also the oil tank is custom painted red with marble inlay to match. This bike was admired by Warren Buffet and Bill Gates. Both felt they had to sit on it for a picture because they were that impressed!!! This bike was also chosen to be in the 2014 Sturgis Buffalo Chip Calendar. This is a one of a kind that will turn heads wherever you go whether its to your local hang out or a bike show you`ve just entered. Stop in today at Cycle Warehouse, 200 S. Main St. Butler Pa. or call Jen at 724 282 7278. We have two floors of pre-owned, vintage and British motorcycles ready to go. (Butler, Pennsylvania)

- date: 3/20/2021 1:29:05 PM
- number of days: 802 days ago
- city: Butler, pennsylvania
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#75] Custom Built Motorcycles : Chopper 2003 redneck engineering low life pro street chopper

Up for sale is this rare and unique Low Life Pro Street Chopper by Redneck Engineering. A company devoted to custom fabricating lightweight choppers and producing bikes that are unlike any other. From this bikes S&S 107 cubic inch engine to every corner of the bike you find detail after stunning detail. The low profile and V-type handlebars all add to the handling and performance of the bike. Comfort comes easy with the riding stance of this bike, so every mile goes by easily. The bike is a rocket. The hardtail design makes for an exciting ride from the moment you first start the bike until you put the kickstand down and allow the bike to show itself off. The sinister look and feel is appealing to anyone and this bike proves itself worthy. This is certainly a bike to enjoy whether you are riding or admiring it on the stand. This bike has an digital speedometer but it does not have an odometer so the true mileage is unkown. We are the second owner o this bike and have put maybe a few hundred miles on since the previous owner said it had well under 10,000 miles. S&S 107 Cubic Inch Super SidewinderS&S Super Shorty G CarbSkull Air BreatherAir Cooled V-TwinSlam Button StarterStraight Pipes by Martin Brothers6-speed Revtech TransmissionHiteck 4` Primary/BeltDry Clutch SystemRedneck Triple TreesV-BarsPM Front Master-cylinder and CaliperAccuitronix Foot ControlsFront wheel 18`Rear Wheel size- 250Billet Turn SignalsChrome in great condition (Saline, Michigan)

- date: 3/20/2021 7:05:14 AM
- number of days: 802 days ago
- city: Saline, michigan
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#76] Custom Built Motorcycles : Chopper Redneck Custom motorcycle

Up for sale is a Custom Motorcycle built by Redneck engineering. It has a 130 Cubic Inch Revtech Motor and 6spd trans. I has a custom (BadAss) shifter rod (see pic). Bike is in Like New condition. Feel free to ask questions. Thanks for looking. I reserve the right to end listing early because It is listed for sale local. (Salem, Virginia)

- date: 2/3/2021 10:49:47 AM
- number of days: 847 days ago
- city: Salem, virginia
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#77] 2002 Redneck Engineering GETTIN HIGH

Classic details meet new tech. Custom built & special ordered reinforced frame & tubing from the factory. 5` backbone & 8` stretch in the downtubes make for a perfect fit. 100 cubic inch REV TEC 100hp v-twin EVO motor in matte satin finish with chrome valve covers. PRIMO 3` open primary belt drive in polished aluminum finish, oversized chain link drive with EXILE cycles rotor rear brake disc combo. LA Choppers short pipes have great sound. Polished Aluminum velocity stack on Mikuni carb. Hand made tank, seat, and fender. 230mm Avon rear tire is perfect size. 21` front chrome wire spoke rim. 15 X 7 rear chrome wire spoke rear rim. Arlen Ness grips and mirror. All receipts, paperwork and title in hand. Adult owned and always ridden with respect. Always maintained with the best products. Never a burnout. Never abused. Low mileage. Will not disappoint ! 6seven8-776-zero628 (Atlanta, Georgia)

- date: 1/17/2021 8:00:45 PM
- number of days: 864 days ago
- city: Atlanta, georgia
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#78] Custom Built Motorcycles : Chopper THIS A STRETCHED 2005 REDNECK ENGINEERING GETTIN HIGH HARDTAIL CHOPPER

HELLO, I ALSO HAVE A VIDEO OF THE BIKE BEING COLD STARTED. THANKS SO MUCH AND MAKE AN OFFER, DWAYNE (5045771153)ABC (Estero, Florida)

- date: 1/12/2021 3:25:42 PM
- number of days: 869 days ago
- city: Estero, florida
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#79] 2000 Buell Firebolt

2000 Buell Firebolt , CHECK OUT THIS CUSTOM! Powered by Buell. 100hp motor. Redneck engineering chassis, inverted forks. House of Kolor Neon Orange Candy paint. $13,500.00 8042693312 (Richmond, Virginia)

- date: 1/5/2021 12:32:43 PM
- number of days: 876 days ago
- city: Richmond, virginia
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#80] Custom Built Motorcycles : Chopper CUSTOM CHOPPERS INC CHOPPER INSPIRATION

Award Winning Custom Chopper Frame: Custom Redneck Engineering Metallic Red & Black with Web Design.Engine: Custom Chrome RevTech 100, Custom Chrome Carburetor, Custom Black Exhaust.Transmission: Custom Chrome 6-Speed with Semi Automatic Clutch and Suicide Shifter.BDL 3` Open Custom Belt Drive.Custom: Fuel Tank with Rear and Front Fenders.250 Rear Tire with Custom Web Design Metallic Red Rear and Front Wheels.Custom web Design Leather Stitch Solo and Passenger Seats.Choppers Inc. Inspiration Design throughout all the Bike. If you have any questions please email me. Thank you for watching and good luck on the Auction. `NO RESERVE & 100% FEEDBACK` (Miami, Florida)

- date: 12/30/2020 9:10:10 PM
- number of days: 882 days ago
- city: Miami, florida
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#81] 2008 Redneck Engineering Geico Redneck Logic

2008 Redneck Engineering Geico Redneck Logic, 2008 Geico BUELL Mutant Red Neck Chopper, Bobber. Built by Logic Cycles. A 1200 c.c. Buell engine thats fast, reliable and different from most other choppers truly sets this bike apart. Custom Red Neck drop seat and a custom springer front end painted to match the beautiful Red paint. The grey marble inlay is gorgeous and sets the bike off perfectly. Also the oil tank is custom painted red with marble inlay to match. This bike was admired by Warren Buffet and Bill Gates. Both felt they had to sit on it for a picture because they were that impressed!!! This bike was also chosen to be in the 2014 Sturgis Buffalo Chip Calendar. This is a one of a kind that will turn heads wherever you go whether its to your local hang out or a bike show you`ve just entered. Stop in today at Cycle Warehouse, 200 S. Main St. Butler Pa. or call Jen at 724 282 7278. We have two floors of pre-owned, vintage and British motorcycles ready to go. (Butler, Pennsylvania)

- date: 12/15/2020 12:04:22 PM
- number of days: 897 days ago
- city: Butler, pennsylvania
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#82] Custom Built Motorcycles : Bobber 2013 redneck engineering custom bobber show bike

2013 Bobber, Pro Built, Redneck EngineeringFrame: Redneck Engineering Mutant Name: Bob This Engine: Buell S1 White Lighting 1203 cc Engine Color: OD green and Gloss Black Paint (military style). Check out redneckengineering.com and you will see the base price on this bike is $22,995.00 with no options or upgrades like I have below. Many custom parts on the bike were built only for this bike. This is a very cool bike and gets attention every time it hits the street. 105 hp and light weight for a chopper so its fun to ride. Very dependable and can be ridden anywhere no problems. Here is a YouTube Videos Driving around Houston as well as before a photo shoot.https://youtu.be/LziwBMGI5ZY Start up Walk around videos https://youtu.be/bqUL8QUVnTk Install of headlights high beam & low beam, gas cap. https://youtu.be/VOAPX6V69G8 Details on build -0 up/3 out 38 degree rack- 18/180 Tire- Raised Engine Mounting Points- Fixed Transmission Plate- Milled Axle Blocks for paint relief- Internal fork stops- All frames are made from DOM Steel Tubing (.134-.156) - Tig Welded by hand- Unique hexagonal axle block design - Rear facing seat post and hoop shaped rear section- Custom Redneck Engineering Gas Tank & Rear Fender- The forward controls are DNA and the exhaust, air cleaner, battery box, and the oil bag is custom built. - The wheels, front fork assembly and brakes are factory 98` Buell S1 White Lightening- The engine had 2100 miles before refresh of the engine and approx 2000 miles from reassembly.- 42mm HSR Mikuni (not the factory carb)- Added high beam switch- Added Horn (removable after inspection- Custom Controls for blinkers - Custom smoked blinker side markers- Custom handmade Leather seat- Black Out Package (Hand, Foot Controls, Front End, Lines,Cable.- Chrome / Black Engine covers. - Primary Belt Drive - Custom Paint - Current State Inspection Any question feel free to call/text 713-859-1987 Cash + Trade might be an option as well. (Cypress, Texas)

- date: 12/15/2020 9:52:07 AM
- number of days: 897 days ago
- city: Cypress, texas
- source: smartcycleguide.com

realtime search mail alert

view on smartcycleguide.com

← back to results

[#83] 2006 Other Makes REDNECK ENGINEERING SPRINGER GETTIN HIGH CHOPPER

2006 Other Makes REDNECK ENGINEERING SPRINGER GETTIN HIGH CHOPPER - 9995.00

- date: 11/5/2020 2:28:57 AM
- number of days: 937 days ago
- source: ebay.com

realtime search mail alert

view on ebay.com

← back to results

[#84] 2006 REDNECK ENGINEERING SPRINGER GETTIN HIGH CHOPPER

Used 2006 REDNECK ENGINEERING SPRINGER GETTIN HIGH CHOPPER - Asking price: 9995 dollar - Craigslist

- date: 10/26/2020 1:50:02 PM
- number of days: 947 days ago
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#85] 2005 Redneck Engineering Curves

Used 2005 Redneck Engineering Curves - Asking price: 12950 dollar - Craigslist

- date: 10/26/2020 1:49:53 PM
- number of days: 947 days ago
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#86] New listing 2005 Redneck Engineering Curves

New listing 2005 Redneck Engineering Curves - 12950.00

- date: 10/5/2020 3:12:02 PM
- number of days: 968 days ago
- city: Kalamazoo, michigan
- source: ebay.com

realtime search mail alert

view on ebay.com

← back to results

[#87] 2014 Redneck Engineering Build

Jun 19 2014 Redneck Engineering Build $10000 (St Clair shores)

- date: 6/30/2020 1:37:23 AM
- number of days: 1065 days ago
- source: newyork.craigslist.org

realtime search mail alert

view on newyork.craigslist.org

← back to results

[#88] 2006 Redneck Engineering Gettin High Chopper --

2006 Redneck Engineering Gettin High Chopper -- - 10950.00

- date: 10/27/2018 1:39:54 AM
- number of days: 1677 days ago
- source: ebay.com

realtime search mail alert

view on ebay.com

← back to results